Description
Five reinforced rubber fuel lines — 3/16" up through 1/2" — plus 25 matching clamps. Everything you need to rebuild a fuel system on a mower, ATV, snowblower or tractor, without buying five separate rolls.
What's in the box
- 5 fuel lines, 5 ft each — 3/16", 1/4", 5/16", 3/8" and 1/2"
- 25 hose clamps — sized to match every line in the kit
Specifications
| Material | NBR rubber with braided polyester reinforcement |
|---|---|
| Wall thickness | 3 mm |
| Working pressure | 300 PSI |
| Burst pressure | 1200 PSI |
| Temperature range | -40°F to 257°F (-40°C to 125°C) |
| Hose length | 5 ft per line |
Where it fits
Made for the fuel systems people actually work on: lawn mowers, cultivators, motorcycles, ATVs, tractors and other small engine equipment, plus automotive fuel systems and oil cooling lines. The thick 3 mm wall stands up to vibration and stays flexible in cold weather, so it is not a one-season part.
Before you buy
Check the size you need first — this kit starts at 3/16" ID. If your engine uses the thin 1/8" line for a primer or return run, take the six-size kit instead; it adds that size. And stay inside the ratings: 300 PSI working, 1200 PSI burst. Running a hose past them is where failures come from. Not sure which size goes where? Send us a message and we will tell you straight.
Shineyoo is a US-based seller. Every order is picked, packed and shipped from our own warehouse, and we answer messages within 24 hours.
